Zc1100cl automatic card issuing machine

1. Product introduction

Zc110cl is an automatic card issuing / writing device developed by Beijing Guanghong electronics. The device can read and write contact CPU card and non-contact CPU card (type A / b). The device integrates card recycling and issuing equipment; It is applicable to the issuance of large and medium-sized card consumption systems, the writing of personalized data of batch cards in system integration enterprises or factories, the batch analysis and processing of bad cards, etc.

3. Technical specifications

2. Power supply AC220V;

2. Power ≤ 48W;

2. Card issuing duration ≤ 2S (from card box to IC card position);

2. The equipment adopts RS232 full duplex asynchronous communication and baud rate support

2 1200 / 2400 / 4800 / 9600 / 19200 / 38400bps (9600bps by default),

2 frame structure, 1 start bit, 8 data bits, no check bit, 1 stop bit;

2. Usb-b type square port is optional, which is connected with PC, and can be used when external card reader is required;

2. The equipment has various status indicators. After the equipment is powered on or in standby mode, the indicator flashes, and it is always on when it is in communication state;

2. The service life of IC card contact of card issuer is more than 300000 times;

2. Circuit reading and writing life ≥ 1.6 million times;

2. The capacity of the card inlet box is about 120pcs / 250pcs (slightly different according to the thickness of the card);

2. The capacity of the card warehouse is about 120 PCs (slightly different according to the thickness of the card);

2. The capacity of the recovery bin is about 12pcs (slightly different according to the thickness of the card);

2. Working environment temperature: 0 ℃ - 55 ℃, humidity: 0-90% RH (no condensation);

2. Storage ambient temperature: - 20 ℃ - 80 ℃, humidity: 0-95% RH (no condensation);

2. The size is 36cm * 12.5cm * 23cm;

2. The weight of the whole machine is about 5.6kg;

2 accessories include a host, a power cord, an aviation plug, a capacity of 120 / 250 cards in the card bin, a card out bin, a recycling bin, two card seats, a card pressing block and two cleaning cards.

2. The equipment control mode is that the upper computer is the active equipment and the card issuing machine is the driven equipment. The card issuing machine can carry out corresponding operation after receiving the command of the upper computer.

2 when the card issuing machine starts the corresponding operation, it immediately responds to the upper computer instead of waiting for the action to be completed.